- A Voyager's Companion

USB Sreen not roconize
Page 1 of 1

Author:  ploubaz22 [ 20 Nov 2014, 05:16 ]
Post subject:  USB Sreen not roconize

installed the latest version of navigatrix a IFPCW 2 I have a screen problem that is not recognized, I try 2 screen a touch screen USB Mimo 720 aini a screen mt1452 lenovo.
if I install a system on Bébian IFPCW 2 screens are well known, alas not with navigatrix

Author:  ploubaz22 [ 21 Nov 2014, 07:08 ]
Post subject:  Re: USB Sreen not roconize

for this screen usb perhaps je must install display link
can you confirm

Author:  svattila [ 21 Nov 2014, 12:18 ]
Post subject:  Re: USB Sreen not roconize

which link?

Author:  ploubaz22 [ 22 Nov 2014, 18:04 ]
Post subject:  Re: USB Sreen not roconize

Display link was drivers for usb screen for windows for linux perhaps it was the same
I try to found answer to use navigatrix with usb screen

Author:  Moe [ 23 Nov 2014, 18:49 ]
Post subject:  Re: USB Sreen not roconize

Je suis désolé, je ai été très occupé, mais je suis à la recherche d'une solution.

Author:  Moe [ 23 Nov 2014, 18:53 ]
Post subject:  Re: USB Sreen not roconize

Really, I'm not so busy, just disorganised, but USB video is new for me and want to get it 'straight' in my head, first.

Author:  ploubaz22 [ 26 Nov 2014, 16:43 ]
Post subject:  Re: USB Sreen not roconize

Moe wrote:
Je suis désolé, je ai été très occupé, mais je suis à la recherche d'une solution.

Merci pour la recherche d e la solution de mon cote j essaye aussi differentes choses mais je ne connais pas bien linux

Author:  ploubaz22 [ 04 Dec 2014, 07:05 ]
Post subject:  Re: USB Sreen not roconize

when i try to install dirver display link with this command
apt-get install xserver-xorg-video-displaylink

I have this error message
Impossible d'ouvrir le fichier verrou /var/lib/dpkg/lock - open (13: Permission non accordée)

I have found this forum to install usb screen ... untu-12-04

and other

Author:  Moe [ 04 Dec 2014, 18:43 ]
Post subject:  Re: USB Sreen not roconize

There are two major issues.

When modifying the system, either adding or removing software packages, you must "be root", or act as root (a Super User) to DO 'root' activities. This requires either logging in as root, or prefacing your commands with sudo, sudo apt-get install geogebra, for example.

But, the other issue is the command must be a valid command. The software package you are trying to install must exist, and it must be 'installable'.

This is the larger problem in trying to get your Mimo 720 USB monitor to work.

The URL you reference mention a package that is no longer available in the current repositories.

The closest one is

You could download the file.

cd ~/Downloads

sudo dpkg -i xserver-xorg-video-displaylink_0.3-0ubuntu10_i386.deb
...but this does not solve your problem.
moe@fission-chips:~/Downloads$ sudo dpkg -i xserver-xorg-video-displaylink_0.3-0ubuntu10_i386.deb
(Reading database ... 214195 files and directories currently installed.)
Preparing to unpack xserver-xorg-video-displaylink_0.3-0ubuntu10_i386.deb ...
Unpacking xserver-xorg-video-displaylink (0.3-0ubuntu10) over (0.3-0ubuntu10) ...
dpkg: dependency problems prevent configuration of xserver-xorg-video-displaylink:
xserver-xorg-video-displaylink depends on xorg-video-abi-11; however:
Package xorg-video-abi-11 is not installed.

dpkg: error processing package xserver-xorg-video-displaylink (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
The package xorg-video-abi-11 not installed, and is required, but cannot be found in these same repositories.

Additionally, there have been changes in the way the xserver (the GUI of the system) is configured.
There have been changes in the 6+ years these USB monitors have been more common, as we see by the absence of current software packages.

I have heard this is because support has been 'pre-installed' in the Linux kernel. I have not had time to check if this is just a rumour, or if it was built into the kernel used in the latest Navigatrix.

To make matter even more complicated, I read reports the chipset in the Mimo720 USB changed last year, --but they did not change the model number-- and the DisplayLink software is no longer applicable. Sometimes it is hard to know what is real; one person says 'X', the next says it didn't work, a third says something else.

I believe it will work.

The difficulty for me is I do not have a unit to test and the $300AUD to get one doesn't make it likely I will. This slows investigation, otherwise it's just stabbing in the dark.

Author:  ploubaz22 [ 07 Dec 2014, 12:55 ]
Post subject:  Re: USB Sreen not roconize

Thank you for your help :D

I try tommorow to install display link

The the usb screen i try with other sreen like Lenovo ThinkVision lt1421 Usb LCD it was the same problem

Author:  ploubaz22 [ 08 Dec 2014, 07:25 ]
Post subject:  Re: USB Sreen not roconize

was it possible to install this package xorg-video-abi-11 and where i can download this
Best regards.

Author:  Moe [ 10 Dec 2014, 09:45 ]
Post subject:  Re: USB Sreen not roconize

This is the problem. The package you are looking for does not exist.

Looking around I see

But it is almost 4 years old. I haven't kept track of changes that would render this information as dated and possibly useless.

I went through a series of websites it referenced;, that referenced,, which self referenced;, and also;

Following the instructions from, might work. But it might also not work. The kernel might have to be rebuilt to include the software code to make it work.

And then finally from the manufacture;

But there is no 'Part-2' that I can find anywhere. So I don't know if the instructions are complete, or has other typos, error, or omissions.

Author:  ploubaz22 [ 17 Dec 2014, 08:08 ]
Post subject:  Re: USB Sreen not roconize


I think there are conflict with other screen

and when i type this # xrandr --setprovideroutputsource 1 0 i have no screen enable and i must reinstall navigatrix

I try with another screen model lenovo LT1421 and i have no video on it

best regards

xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x65 cap: 0x0 crtcs: 2 outputs: 1 associated providers: 0 name:modesetting
Provider 1: id: 0x41 cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 0 name:modesetting

~$ xrandr --current
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 4096 x 4096
DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0 70.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 60.0
720x400 70.1

3.111926] usb 1-2.2: New USB device found, idVendor=17e9, idProduct=401a
[ 3.111937] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.111945] usb 1-2.2: Product: nanovision MiMo
[ 3.111953] usb 1-2.2: Manufacturer: DisplayLink
[ 3.111960] usb 1-2.2: SerialNumber: USM700-91220015
[ 3.200181] usb 1-2.3: new full-speed USB device number 6 using ehci-pci
[ 3.312807] usb 1-2.3: New USB device found, idVendor=1ac7, idProduct=0001
[ 3.312818] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.312826] usb 1-2.3: Product: USB Touchpanel
[ 3.312833] usb 1-2.3: Manufacturer: e2i Technology, Inc.
[ 3.312839] usb 1-2.3: SerialNumber: L000000000
[ 3.320944] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.428090] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[ 3.513906] checking generic (3f800000 500000) vs hw (3f800000 7bf000)
[ 3.513914] fb: conflicting fb hw usage psbdrmfb vs VESA VGA - removing generic driver
[ 3.513955] Console: switching to colour dummy device 80x25
[ 3.514476] fbcon: psbdrmfb (fb0) is primary device
[ 3.725848] Console: switching to colour frame buffer device 160x64
[ 3.797709] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
[ 3.797716] gma500 0000:00:02.0: registered panic notifier
[ 3.797745] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on min

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group