Navigatrix.net - A Voyager's Companion :: View topic

Diecicentouno wrote:

Moe wrote:

Ora si sono solo scherzi con me.

I don't know what you want to write... i'm not joking...
perhaps the best think that I can do is reinstall navigatrix...

p.s. i don't know how I can attache the file... "the extension .*** is not allowed"!!

Run the following command from the terminal:

Code:

uname -r

if it doesn't say 3.13.9-dsp then you should get the latest version of Navigatrix and everything will work.

If you want to attach files to posts the easiest procedure is to rename the file <original_file_name_with_extention.ext>.doc

That is, append the whole name+extension with .doc. For example, you want to attach a file called, kamikaze.sh; shell scripts are not allowed, as are a bunch of others. Rename it kamikaze.sh.doc and the machine will accept it.

Other people will have a clue what it is.

The stumbling block you encountered was set up by the authors of the site software to keep malicious code from operating on the website, not to just be irritating.

Author:	la5zo [ 01 Apr 2015, 15:08 ]
Post subject:	Re: update opencpn
I am trying to upgrade Opencpn.. no idea what the password is. How do I go from here ? \| gtc@BAATEN:~$ sudo apt-get remove install-info && sudo add-apt-repository ppa:opencpn/opencpn && sudo apt-get update && sudo apt-get install opencpn opencpn-doc opencpn-tcdata opencpn-gshhs-low opencpn-gshhs-crude opencpn-gshhs-intermediate opencpn-gshhs-high opencpn-gshhs-full [sudo] password for gtc:

Author:	Moe [ 01 Apr 2015, 17:49 ]
Post subject:	Re: update opencpn
The password is what you created when you did your hard drive installation. If you can't remember it you can reset your password following the next steps: Reboot your computer / Turn your computer on. Hold down the Shift key at the start of the boot process to enable the GNU GRUB boot menu (if it does not show) Press ESC at the GNU GRUB prompt. Press e for edit. Use the Arrow keys to highlight the line that begins with kernel and press the e key. Go to the very end of the line and add rw init=/bin/bash Press Enter and then press b to boot your system. Your system will boot up to a passwordless root shell. Type in passwd gtc <-- your username Set your new password. Restart your system. Good Luck.

Author:	Moe [ 01 Apr 2015, 18:11 ]
Post subject:	Re: update opencpn
The same process to 'restore' a password, but with pictures

Author:	la5zo [ 02 Apr 2015, 10:16 ]
Post subject:	Re: update opencpn
Many thanks Moe, radar plugin installed. Geir

Author:	Moe [ 02 Apr 2015, 11:25 ]
Post subject:	Re: update opencpn
Cool.

Navigatrix.net - A Voyager's Companion http://navigatrix.net/

update opencpn http://navigatrix.net/viewtopic.php?f=4&t=770	Page 2 of 2

Author:	Microyacht [ 04 Apr 2015, 10:06 ]
Post subject:	Re: update opencpn
. . . . . When I upgraded OpenCPN from 3.3X to 4.0 using instructions here, I lots all the original Plug-in's which came with it when I installed Navigatrix! Steve/G4MJW

Author:	Moe [ 04 Apr 2015, 11:16 ]
Post subject:	Re: update opencpn
I never checked if the old and the new default OpenCPN plugin directories are in the same places, or if they have been moved. The other question is if the old plugins are still compatible with 4.0.0 for whatever reason...I don't know, Things change. I'm not paying attention. If there is neither the change in location, nor a change in attachment, it might be just a matter of reminding the new version what's going on.

Author:	Diecicentouno [ 05 Apr 2015, 04:56 ]
Post subject:	Re: update opencpn
Moe wrote: Ora si sono solo scherzi con me. I don't know what you want to write... i'm not joking... perhaps the best think that I can do is reinstall navigatrix... p.s. i don't know how I can attache the file... "the extension .*** is not allowed"!!

Author:	Moe [ 05 Apr 2015, 08:54 ]
Post subject:	Re: update opencpn
Diecicentouno wrote: Moe wrote: Ora si sono solo scherzi con me. I don't know what you want to write... i'm not joking... perhaps the best think that I can do is reinstall navigatrix... p.s. i don't know how I can attache the file... "the extension .* is not allowed"!! Run the following command from the terminal: Code:** uname -r if it doesn't say 3.13.9-dsp then you should get the latest version of Navigatrix and everything will work. If you want to attach files to posts the easiest procedure is to rename the file <original_file_name_with_extention.ext>.doc That is, append the whole name+extension with .doc. For example, you want to attach a file called, kamikaze.sh; shell scripts are not allowed, as are a bunch of others. Rename it kamikaze.sh.doc and the machine will accept it. Other people will have a clue what it is. The stumbling block you encountered was set up by the authors of the site software to keep malicious code from operating on the website, not to just be irritating.

Author:	Diecicentouno [ 13 Apr 2015, 04:24 ]
Post subject:	Re: update opencpn
Moe wrote: Diecicentouno wrote: Moe wrote: Ora si sono solo scherzi con me. I don't know what you want to write... i'm not joking... perhaps the best think that I can do is reinstall navigatrix... p.s. i don't know how I can attache the file... "the extension .* is not allowed"!! Run the following command from the terminal: Code:** uname -r if it doesn't say 3.13.9-dsp then you should get the latest version of Navigatrix and everything will work. If you want to attach files to posts the easiest procedure is to rename the file <original_file_name_with_extention.ext>.doc That is, append the whole name+extension with .doc. For example, you want to attach a file called, kamikaze.sh; shell scripts are not allowed, as are a bunch of others. Rename it kamikaze.sh.doc and the machine will accept it. Other people will have a clue what it is. The stumbling block you encountered was set up by the authors of the site software to keep malicious code from operating on the website, not to just be irritating. Thank you Moe, I think that tis is the problem! 3.8.11 the result! Now, how I can update Navigatrix?

Author:	Moe [ 13 Apr 2015, 08:11 ]
Post subject:	Re: update opencpn
The easiest way is to download the new image, (download.php) and create a new USB or DVD.

Author:	Diecicentouno [ 20 Apr 2015, 02:35 ]
Post subject:	Re: update opencpn
Moe wrote: The easiest way is to download the new image, (download.php) and create a new USB or DVD. thank you very much!

Author:	Moe [ 20 Apr 2015, 10:48 ]
Post subject:	Re: update opencpn
In the end, if you can't win with dazzling brilliance, improve your chances with enduring persistence. The race goes to those who finish.

Page 2 of 2	All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/