Navigatrix.net - A Voyager's Companion http://navigatrix.net/ |
|
satellite phone hang-up http://navigatrix.net/viewtopic.php?f=4&t=780 |
Page 1 of 1 |
Author: | tonipez [ 25 Feb 2015, 15:37 ] |
Post subject: | satellite phone hang-up |
Hello, I'm at my first experience with an Inmarsat IsatPhonePro and Navigatrix - Airmail. It works perfectly, too much perfectly... because once connected, I don't know how to hang-up the call. In the satellite connection window, CTRL-C only close the window, but the connection stays up. Any suggestion? Thank you! |
Author: | Moe [ 27 Feb 2015, 01:57 ] |
Post subject: | Re: satellite phone hang-up |
Open up wvdial.conf, the configuration file for the dialler, Code: gksudo medit /etc/wvdial.conf Inside will be a lineQuote: Init2 = ATV1E0S0=0&D2&C1 orQuote: Init2 = AT &F E0 V1 &D2 &C1 W2 S95=47 S0=0 +cbst=71,0,1 orQuote: Init2 = ATS0=1V1X4E1Q0&c1 orQuote: Init2 = ATV1E0S0=0&D2&C1 After you have unscrambled your eyes, look for &D2 in the line.As you see only example #3 lacks &D2 &D2 means to hang up and return to command mode after losing DTR (data terminal ready). If it's not there put it in the line, anywhere in front of another &...like the others, with or without spaces. for example Code: Init2 = ATS0=1V1X4E1Q0&D2&c1 Save and try it out.If your configuration file already has the command &D2 in the Init script, well, I'm stumped as perfection only goes so far. There is, however, the button on the phone as a last resort, primitive, I know, but it will have to do until something better comes along. There is ATH, which is the "slam-down-the-phone" hang up command, but I don't know where to put it in the dialling script so you're not hanging up before your finished with the connection. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |