The Navigatrix has been updated. The new website can be found at navigatrix.net.




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: scanned charts on OpenCPN

Joined: 05 Jan 2017, 12:03
Posts: 3
I've been trying to scan some charts to use in OpenCPN. So far I've used the chart convertor to create a bmp which I've georeferenced, however I don't know how to proceed from here as OpenCPN doesn't seem to recognise the file. Can anyone tell me where I've gone wrong or what I need to do next?

Thanks!

Iain


Top
   
 
 Post subject: Re: scanned charts on OpenCPN

Joined: 04 Nov 2010, 20:51
Posts: 1062
Which instruction set are you following?

This is around

viewtopic.php?f=4&t=325&p=1382&hilit=chart+maker#p1382

But I don't know if it's applicable to your situation, or is still a valid/current process?


Top
   
 
 Post subject: Re: scanned charts on OpenCPN

Joined: 01 Nov 2013, 10:17
Posts: 1
I am now trying to map cal some .png charts that have been converted from .pcx tiles. I have never done map cal in navigatrix before, but did it long ago on a windows machine. I read the OpenCPN and SeaClear manuals and followed the instructions as closely as I was able. When I enter four calibration points on the chart and click on save calibration data, an error message pops up about division by zero. These are old charts that I really don't want to use as the only source of navigation information, but if they were loaded into OpenCPN they would be available when I was in that area, and they have pilotage information that could be very useful.

I participated in several boat deliveries recently and on the last one the owner and the skipper agreed that OpenCPN running in Navigatrix on a Getac B300X was the most convenient and useful navigation device on board. The B300X is waterproof and has a screen capable of daylight viewing, so we could plop it right in front of the helmsman an pilot into port. That boat was well equipped with a Raymarine and a Garmin chartplotter, around 7 inch screens, too bad they weren't user friendly.

I may fire up my old windows machine and try calibrating charts there, but it seems to be a lot of work transferring files back and forth.


Top
   
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 


Search for:
cron

Credits © 2010 - 2022