The Navigatrix has been updated. The new website can be found at navigatrix.net.




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Nx and Rapsberry

Joined: 29 Jul 2011, 16:32
Posts: 50
Is it possible to install NX on this tiny board ?
If NOT, how to do or is there a project to build a specific version for this board?
Thanks a lot,
Philippe from France


Top
   
 
 Post subject: Re: Nx and Rapsberry

Joined: 05 Jul 2013, 08:53
Posts: 72
Hi Philippe,

use the openplotter software for the Raspberry PI . I have installed openPlotter and it is running openCpn without problems.

http://www.sailoog.com/openplotter

Ferdinand


Top
   
 
 Post subject: Re: Nx and Rapsberry

Joined: 29 Jul 2011, 16:32
Posts: 50
OK, thanks.
Not possible to use Nx, only Openplotter.


Top
   
 
 Post subject: Re: Nx and Rapsberry

Joined: 14 Dec 2016, 17:14
Posts: 2
you can use the data from the pi openplotter to opencpn on navigatrix.
if on the same network.
openplotter has a hotspot you can enable @ ip 10.10.10.1
enter the pi's address in the connections tab port 10109 tcp in opencpn nx..
in openplotter tools/nmea 0183 geniraror /opencpn defaults..
navigatrix is x86 and pi is arm processor.so NX wont run on pi


Top
   
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 


Search for:

Credits © 2010 - 2024