I am using a Digitus USB to Rs 232 converter to connect to my Pactor Modem.
Somehow I can't get that working. I do have drivers for Linux, but there seems to be no facility to install them.
Any ideas?
| Navigatrix.net - A Voyager's Companion http://navigatrix.net/ |
|
| USB Converter http://navigatrix.net/viewtopic.php?f=6&t=382 |
Page 1 of 1 |
| Author: | Atmo [ 14 May 2013, 16:10 ] |
| Post subject: | USB Converter |
I am using a Digitus USB to Rs 232 converter to connect to my Pactor Modem. Somehow I can't get that working. I do have drivers for Linux, but there seems to be no facility to install them. Any ideas?
|
|
| Author: | Moe [ 14 May 2013, 21:07 ] |
| Post subject: | Re: USB Converter |
The drivers need to compiled. I found the drivers shipped with the Windows drivers are incomplete. I used the Linux driver archive from Digitus: http://ftp.assmann.com/pub/DA-/DA-70146-1___4016032265399/DA-70146-1_driver_linux-1.0.0_20101202.tar.gz Unpack the archive in Downloads; open a terminal: Change to the working directory Code: cd Downloads/libftd2xx1.0.0/libusb-1.0.8 Configure the buildCode: ./configure Make the buildCode: make Install...Code: sudo make install See if that does the trick. |
|
| Author: | Atmo [ 15 May 2013, 17:14 ] |
| Post subject: | Re: USB Converter |
Moe wrote: The drivers need to compiled.
I found the drivers shipped with the Windows drivers are incomplete. I used the Linux driver archive from Digitus: http://ftp.assmann.com/pub/DA-/DA-70146-1___4016032265399/DA-70146-1_driver_linux-1.0.0_20101202.tar.gz Unpack the archive in Downloads; open a terminal: Change to the working directory Code: cd Downloads/libftd2xx1.0.0/libusb-1.0.8 Configure the buildCode: ./configure Make the buildCode: make Install...Code: sudo make install See if that does the trick. |
|
| Author: | Atmo [ 16 May 2013, 14:46 ] |
| Post subject: | Re: USB Converter |
Moe wrote: The drivers need to compiled.
I found the drivers shipped with the Windows drivers are incomplete. I used the Linux driver archive from Digitus: http://ftp.assmann.com/pub/DA-/DA-70146-1___4016032265399/DA-70146-1_driver_linux-1.0.0_20101202.tar.gz Unpack the archive in Downloads; open a terminal: Change to the working directory Code: cd Downloads/libftd2xx1.0.0/libusb-1.0.8 Configure the buildCode: ./configure Make the buildCode: make Install...Code: sudo make install See if that does the trick. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|